2021-12-30

01:23:12Z DL4CQ MOIN MOIN
03:42:47Z PU2RQV_Roque hi
05:06:41Z PA3BYV Poll gm all
06:26:33Z DD4YR Robert gm all ...
06:27:37Z PA3BYV Poll gm Robert
06:28:42Z PA3BYV Poll 8.6 dB D0
06:31:09Z DD4YR Robert gm Poll
06:31:50Z DG2TF Falko guten Morgen..
06:32:19Z PA3BYV Poll D-0.5 aber a/v ok, Robert
06:32:54Z DD4YR Robert Ja, hatte vorhin aus versehen zwei scripte am laufen ....
06:32:58Z DD4YR Robert gm Falko
06:33:04Z PA3BYV Poll gm Falko
06:33:20Z PA3BYV Poll eine genügt :-)
06:33:36Z DO3ASE_Rico Moin an alle Ömer ;)
06:33:43Z DD4YR Robert ja :-) hier jetzt 8,7 dB D0 im 1m Offset.
06:33:48Z DD4YR Robert Hallo Rico.
06:33:59Z PA3BYV Poll gm Rico
06:34:37Z PA3BYV Poll nur 8.2 dB, 8.6 gewünscht, aber bleibt gut, infrared
06:35:09Z DO3ASE_Rico Beim Robert kommt immer der Wind von Westen :D :D
06:35:16Z DD4YR Robert osten
06:35:28Z DO3ASE_Rico Bild genordet :D
06:35:45Z DD4YR Robert Cam schaut nach süd süd/ost
06:36:05Z DO3ASE_Rico Dann musst die Fahne in die andere richtung flattern lassen :D
06:37:04Z I5VVO Omero Gm all..
06:37:17Z PA3BYV Poll gm Omero
06:37:54Z I5VVO Omero @DD4YR D1 Mer 8.3
06:38:45Z DD4YR Robert gm Omero, tnx for report. Low pwr test ....
06:38:52Z DO3ASE_Rico Ist deine Cam kabelgebunden (Netzwerk) ?
06:39:11Z DD4YR Robert Ja, und POE
06:39:50Z DO3ASE_Rico ok, bin auf der suche denn meine Wifis machen nur mist wenn ich auf sendung gehe. besonders wenn ich auf 99.250 bin geht überhaubt nix mehr.
06:41:15Z DO3ASE_Rico gibt es bei POE eine Max-Länge? Wegen Spannungsverluste.
06:41:53Z I5VVO Omero @DD4YR , despite the size of my antenna (95 cm offset) your signal is still stable. 73
06:42:46Z DD4YR Robert Oh, thats fine Omero. good rx for 95 cm. now 1dB more TX pwr.
06:43:09Z DD4YR Robert Rico, möglich, auf weiß ich ned. Hab hier schon 40 Meter in Betrieb.
06:43:15Z PA3BYV Poll 8.9 dB D0 jetzt
06:43:37Z DO3ASE_Rico ah ok, muss nur 30m überbrücken.
06:43:45Z DO3ASE_Rico d2 11dB robert ;)
06:43:51Z PA3BYV Poll mein signal daneben ist SNR 9.54
06:44:06Z DD4YR Robert Das geht. sind ja 48 Volt oder so, also wenig strom aufgrund spannung
06:44:39Z DD4YR Robert Ja, Poll, ist DVB-T, hab grad nichts in Betrieb für DVB-T. Alles abgebaut.
06:44:42Z DO3ASE_Rico achso, na dann. dachte das die Spannungen weiter unten liegen bei 12v rum.
06:44:52Z I5VVO Omero 9.1 db Robert, now
06:45:18Z DD4YR Robert Nein, so typische POE Netzteile haben 48V, die Cams sind auch dafür ausgelegt.
06:45:24Z PA3BYV Poll wieder neu aufgebaut hier, alles getestet und geht wieder, GNU und auch Knucker
06:45:47Z DD4YR Robert Hab hier einen 8 Fach switch, 4x normal und 4xPOE
06:46:06Z DD4YR Robert POE nur 100kb/s
06:46:30Z DD4YR Robert Omero, tnx, D1 ?
06:46:54Z I5VVO Omero yes D1
06:47:49Z DD4YR Robert now 1dB more ....
06:48:04Z I5VVO Omero now D2 MER 10.2, Robert
06:48:37Z I5VVO Omero By, have nice day all. 73
06:48:48Z DD4YR Robert same here :-) tnx, 83
06:48:50Z DD4YR Robert 73
06:57:39Z DD4YR Robert SR25 mit 8dB D5 und SF
06:57:54Z DO3ASE_Rico kommt a/v bei dir?
06:58:14Z DD4YR Robert Video ja, audio weiß ich nicht. Keine Lautsprecher hier.
06:58:30Z DO3ASE_Rico achso, ok, kein ding. liegt am meiner vlc dll.
06:58:34Z DO3ASE_Rico die macht spacken
07:00:43Z DO3ASE_Rico nutzt du die aktuelle version vlc?
07:01:04Z DD4YR Robert Nein, irgendwas uraltes. Audio ist da, hab jetzt angesteckt.
07:01:18Z DO3ASE_Rico oh, ver nummer weisst nicht wa
07:01:50Z DD4YR Robert 3.0.12 steht hier wenn ich vlc öffne
07:01:51Z DO3ASE_Rico ich habe hier masiv probleme unter 35ks mit der vlc, weiss nicht warum
07:02:44Z DO3ASE_Rico hier die 3.16ner . ich ändere das mal.
07:03:07Z DO3ASE_Rico dann müsste es ja auch in 20ks gehen. mom
07:03:27Z DD4YR Robert Hab mir vor langer Zeit mal Malware gezogen mit VLC, seitdem mache ich keine Updates mehr nachem ich alles gesäubert hatte.
07:04:40Z DO3ASE_Rico ja, ich müsste auch mal neu aufsetzen o.O
07:05:15Z DO3ASE_Rico jetzt kommt audio aber abgehackt und kein bild . so ein mist.
07:06:06Z DD4YR Robert hab seitdem hier Malewarebytes am Laufen, springt sehr oft an, auch beim surven im Netz oder download von pdf s
07:06:23Z DD4YR Robert Aber infektion hab ich mir keine mehr gefangen.
07:06:42Z DO3ASE_Rico ok. kann ich ja auch mal checken. kommt bei dir was in sr20?
07:06:52Z DD4YR Robert 9,8 dB D5 gelockt, aber noch kein Video.
07:07:40Z DO3ASE_Rico bei mir auch. ts passt aber mit fec. naja, versuch wars wert :D
07:08:51Z DD4YR Robert Welchen Taktgeber hast im PLUTO ? Original noch?
07:09:02Z DO3ASE_Rico nein!
07:09:36Z DO3ASE_Rico Der ist gemodet , gleich nachdem ich ihn 2019 im dez gekauft hatte.
07:10:08Z DD4YR Robert Mit 0,5ppm oder GPSDO ?
07:10:37Z DO3ASE_Rico 0,5 noch, habe noch ein 0.2 da, müsste ma rein.
07:11:01Z DO3ASE_Rico nen ofen hab ich auch noch.
07:11:30Z DD4YR Robert ist irgendwie seltsam, hab jetzt 10dB D5, auch constellation sauber zu sehen, aber kein Video.
07:11:41Z DO3ASE_Rico bei mir kommt auch nix
07:11:59Z DO3ASE_Rico oh , abgestürzt. da stimmt was nicht.
07:12:37Z DO3ASE_Rico Hab den am Netzwerk dran. Da ist das auch komisch das er öffters aussteigt. hab ich bei usb nicht.
07:13:20Z DD4YR Robert Hier auch Netzwerk, über mehrere Switches, Anlage ist etwa 100 Kabelmeter weit weg.
07:14:31Z DD4YR Robert Sind 4 Switch dazwischen.
07:14:38Z DO3ASE_Rico ja, bin hier noch am umbau. Steuerkabel, Netzwerk usw in verlegung nach unten. Sind um die 30m.
07:14:45Z DD4YR Robert Nein, 5, bei der PA ist auch noch einer.
07:15:11Z DO3ASE_Rico Weil unten im Shak hab ich kein Netz, nur Wlan und das ist mist. nicht gerade stark troz reapeter,
07:15:57Z DO3ASE_Rico *Kaffe hol*
07:16:11Z DD4YR Robert Zur Antenne nur Netzwerk und 220 V AC. Steuerung und Messertaufnahme über Netzwerk und Siemens LOGO
07:16:23Z DD4YR Robert Ja, mach dann hier auch Frühstück ...
07:17:56Z DO3ASE_Rico jo, schmecke lasse!
07:50:38Z DJ4ZZ Joe Moin to all
07:51:24Z DJ4ZZ Joe Ist meine Antenne abgesoffen oder liegt es am Wetter. Baker nur noch D1 sonst D6
07:53:28Z DD4YR Robert gm Joe, Bake hier 12,1 dB D7 trotz Regen ....
07:57:25Z DJ4ZZ Joe Moin Robert. Mhh, TX geht
07:57:48Z DJ4ZZ Joe Vielleicht LNB abgesoffen
08:00:00Z DJ4ZZ Joe Geh jetzt erst mal frühstücken und dann schaue ich mal nach
08:38:32Z DJ5PW Juergen oe6thd das ist NB Bereich !!!
08:53:53Z DG7LAZ_Rüdiger CIA is watchingh you ;-))
08:54:42Z DG7LAZ_Rüdiger @ZS6YI Good morning Gary
08:59:20Z IW2HXW Enzo on air 497.750
09:06:26Z DG7LAZ_Rüdiger @IW2HXW Hi Enzo copy your signal,only swl dish 75cm and Octagon sf8008 RX 73,s
09:07:09Z DG7LAZ_Rüdiger nice venedig
09:07:54Z IW2HXW Enzo TNX Rudiger
09:08:25Z IW2HXW Enzo 73
09:08:54Z on8yy gm
09:08:55Z DG7LAZ_Rüdiger Happy new year for you 73,s
09:09:44Z IW2HXW Enzo happy new year for you
09:10:23Z DM2CFL Hartmut Guten Morgen an Alle....
09:13:43Z I4WRM Ros @IW2HXW Ottima emissione Enzo ! Complimenti !! D3 Mer 7,5 Buon Anno !!
09:21:41Z IW2HXW Enzo Ciao Rosario Buon Anno anche a te. grz 73
09:22:28Z DM2CFL Hartmut Happy New Year, IW2HXW :MER 9,7 / D6 in JO71fb....
09:23:05Z IW2HXW Enzo Happy New Year for you and your family 73
09:25:05Z DM2CFL Hartmut Ja Enzo, danke and good wishes...
09:25:29Z IW2HXW Enzo bye bye
09:27:47Z DM2CFL Hartmut Enzo i am on 494,75MHz of AO100
09:29:15Z DM2CFL Hartmut You c
09:31:06Z IW2HXW Enzo I speak only Italian
09:33:00Z IW2HXW Enzo I am sorry
09:34:48Z DM2CFL Hartmut Thanks Enzo, i spea bad english!!! I can good receive your Picture and audio
09:35:32Z IW2HXW Enzo Ok tnx 73 bye bye Happy new year 2022
09:35:52Z DM2CFL Hartmut say 3 Words and the Qso is perfekt !!!
09:38:18Z IW2HXW Enzo Many thanks
09:38:49Z DM2CFL Hartmut Enzo, QSO is Perfekt, many Thanks
10:33:23Z DK7UC Ludwig Guten Morgen DC3zb , Lust auf QSO
12:17:27Z OHHHH WUHHHH :-( .
13:31:48Z G0MJW Mike D2.5
13:33:05Z DJ4ZZ Joe Hello Mike, long time not see you
13:34:37Z G0MJW Mike Hi Joe, Indeed you have not been around for a while
13:35:09Z DJ4ZZ Joe that´s correct
13:35:20Z G0MJW Mike I am away from the 2.4m dish, just a rusty 1m dish here and the wrong focal length too
13:35:37Z G0MJW Mike it's raining, but not dark and no sunglasses
13:35:53Z DJ4ZZ Joe Ok. I still wait for the correct Feedarm for my 2.4m dish
13:36:01Z G0MJW Mike Me too.
13:36:02Z F4HSL-Yves 73 Mike !
13:36:14Z G0MJW Mike Is it an Andrew dish?
13:36:26Z G0MJW Mike Hi Yves - felicitations
13:36:38Z DJ4ZZ Joe It is label with Loral Space Systems
13:36:41Z F4HSL-Yves Tnx
13:36:49Z DJ4ZZ Joe but I think it is an Andrews
13:37:02Z G0MJW Mike Is it in two parts marked bottom and top?
13:37:24Z om0ms_Stevo Hallo Joe, du wachst irgendwie auf
13:37:47Z DJ4ZZ Joe Hi Stevo
13:38:10Z G0MJW Mike Joe - right on the margin of my RX
13:38:11Z DJ4ZZ Joe Mike: It is in 4 Parts. The lower 2 parts are with heater
13:38:30Z G0MJW Mike OK - different to mine then Joe. 4 parts would be easier to handle !
13:39:20Z G0MJW Mike Mine is visible from space.
13:39:52Z DJ4ZZ Joe Thats true. But I need 4 persons to set it to the socket.
13:39:58Z DJ4ZZ Joe My one 2
13:40:14Z G0MJW Mike Actually 3 of us managed it, but not easy
13:40:17Z DJ4ZZ Joe You can see it in Google earth infront of my house
13:40:51Z G0MJW Mike Mine too in Google Earth
13:40:59Z om0ms_Stevo versuche die Leuchtturmebene zu entfernen
13:41:11Z G0MJW Mike but it is almost vertical being an offset dish
13:41:35Z G0MJW Mike so you see more the shadow
13:41:46Z DJ4ZZ Joe I have an offset dish but they gave me a feed holder for a prime focus
13:42:15Z G0MJW Mike Count your blessings, I didn't get a feed holder at all
13:42:25Z G0MJW Mike but the price was very favourable
13:42:42Z om0ms_Stevo super
13:53:53Z DJ4ZZ Joe M0MOI good signal
13:54:12Z DJ4ZZ Joe D4 MER 7.2
14:04:38Z DJ4ZZ Joe Does anybody have the lates Pluto Firmware which work with REV C ?
14:04:59Z DJ4ZZ Joe I download one, but the PTT is not working on REV C
14:29:25Z DC2TH_Wolfgang HI Joe lies mal hier, es gibt ein Patcg, Ref C u. D verhält sich wohl identisch; https://www.f5uii.net/en/patch-plutodvb/
14:29:37Z DC2TH_Wolfgang Patch
14:31:47Z DC2TH_Wolfgang Patch for PlutoSDR Rev. D hardware
15:53:06Z VU2ESE_Farhan Hi people, does anyone know why the beacons on the nb transponder are off?
15:56:08Z ON1RC Chris ON6PY Narrow DATV ---->SR 333
16:00:51Z ON1RC Chris ON6PY Narrow DATV ---->SR 333 !!!!!!!!!!!!!
16:09:41Z ON1RC Chris Rudy Sync Audio-Beeld !!!!!!
16:12:45Z DC2TH_Wolfgang @ VU2ESE_Farhan, yes NB beacons are off
16:15:30Z DC2TH_Wolfgang DB2OS Vor 3 Stunden Today maintenance on our QO100 ground station in Bochum. Short interruptions of LEILA beacons possible.
16:20:03Z ON1RC Chris ON6PY ----->https://amsat-dl.org/wp-content/uploads/2021/02/QO-100-WB-Bandplan-V3.pdf
16:26:12Z ON1RC Chris IZ4BPE ----->https://amsat-dl.org/wp-content/uploads/2021/02/QO-100-WB-Bandplan-V3.pdf
16:32:34Z ON1RC Chris / nick
16:32:55Z ON1RC Chris /nick
16:33:54Z ON75GNT Trial Test
16:57:03Z DD4YR Robert @ G8AYC ... pse take a look here: https://twitter.com/amsatdl/status/1475903849018064896
16:59:33Z G8AYC Nigel Robert: It won't let me in
16:59:47Z G8AYC Nigel Is there a problem?
17:00:39Z G8GTZ I think Robert was saying you should stay above 497.0 with 333ks unless there is no room...
17:01:05Z DD4YR Robert yes. :-)
17:01:13Z G8AYC Nigel There wasn't any room when I started TX
17:01:30Z DD4YR Robert In twitter is a reminder from AMSAT-DL about this.
17:03:11Z DD4YR Robert no problem, I only want to get sure you know this rule.....
17:05:39Z G8AYC Nigel Thanks Robert
17:06:02Z ON1RC Chris Rule ? Robert
17:07:36Z ON1RC Chris There are rules on QO-100.......?
17:09:08Z DD4YR Robert 🙈
17:10:26Z G0MJW Mike Of course there are rules, how would rulebreakers survive otherwise?
17:10:54Z ON1RC Chris HI
17:34:51Z dl6yea-m @djR
17:40:32Z G4KLB Colin test
18:13:26Z Rulebreaker now what's the next rule to break?
18:18:11Z F4NAS-Joel salut F5EL
18:18:28Z F4NAS-Joel f5ETL
18:18:33Z F4NAS-Joel OUI
18:18:40Z F4NAS-Joel oui je vois
18:20:01Z G8AYC Nigel Lots of rule breakers on!
18:34:37Z G0MJW Mike 9250 too weak for me
18:36:26Z ON1RC Chris @ON6PY.. pse take a look here: https://twitter.com/amsatdl/status/1475903849018064896
18:37:10Z HB9DUG Michel DL6RCG, GE MER 6.5 on 120cm
18:41:15Z HB9DUG Michel ON7TU, GE MER8.7 on 120cm
18:42:18Z DL6RCG_Tom michel, tnx for report
18:45:26Z ON7TU Lucien Michel tnx for the report
18:48:02Z DD4YR Robert Na Matthias, was ist los? Deine Settings sind total neben der Spur heute ...
18:48:30Z DL5QY_Matthias ja andere PA :-(
18:48:53Z DD4YR Robert Nun, 30% Videoanteil hat doch nichts mit der PA zu tun?
18:49:13Z DL5QY_Matthias OK moment hatte gerade nur das Signal im Auge
18:49:34Z DD4YR Robert Ah ok. Lass Dich nicht stören ....
18:49:36Z DL5QY_Matthias Habe eine Nokia PA heute in Betrieb genommen
18:50:04Z DL5QY_Matthias Schau mal gleich auf das Signal Robert
18:53:24Z DD4YR Robert Sitzt da noch ein Vorverstärker dazwischen?
18:53:34Z DL5QY_Matthias ja
18:53:43Z DL5QY_Matthias 200mw
18:53:52Z DL5QY_Matthias Direkt in die Nokia
18:54:02Z DD4YR Robert welcher, wie viel % ist der ausgesteuert?
18:54:16Z DD4YR Robert Auf wieviel dB steht der PLUTO ?
18:54:27Z DL5QY_Matthias 4db
18:55:03Z DD4YR Robert Ich meinte, wie viel Leistung macht der VV jetzt. Wens ein 200mW ist sollte der nur max. 50mW betrieben werden.
18:55:28Z DL5QY_Matthias ok der kann ca. 600mw max
18:55:35Z DD4YR Robert Pluto steht auf 4dB ?
18:55:41Z DL5QY_Matthias ja
18:55:41Z DD4YR Robert -4 dB?
18:55:59Z DL5QY_Matthias ja
18:56:07Z DD4YR Robert ok.
18:56:43Z DD4YR Robert kannst Du mal weiter links senden?
18:56:54Z DL5QY_Matthias wieviel
18:57:15Z DD4YR Robert etwa bandmitte
18:57:38Z DD4YR Robert ok, man sieht, dass ganz leicht das Rauschen links und rechts mit ansteigt.
18:57:54Z DD4YR Robert Müsstest mal mit dem anderen Pluto dein Sendesignal anschaun.
18:58:47Z DD4YR Robert Wieviel Leistung macht die Nokia gerade? 2-Transistor?
18:58:49Z DL5QY_Matthias ok Morgen muss die Ausgangsbuchse noch mit Semi und N Buchse anklemmen.
18:59:29Z DD4YR Robert Jo, ganz ideal ist es noch nicht.
19:00:02Z DL5QY_Matthias Ich werde das noch auf den Punkt bringen.
19:00:34Z DL5QY_Matthias Schönen Abend noch Robert mache jetzt QRT
19:04:04Z G6MNJ_Paul test
19:13:05Z G6MNJ_Paul G8GKQ sounds ok
19:14:10Z G6MNJ_Paul GU6EFB no audio
19:29:17Z PA3FBX-Benno Gu6efb fine audio here
19:33:25Z Keith GU6EFB Thanks Benno A quick reboot fixed it
19:41:59Z G0MJW Mike Evening all
19:42:43Z G0MJW Mike Very wet here, beacon is a dB down on normal
19:42:50Z G0MJW Mike ....and that's already low
19:45:36Z Gareth_G4XAT Evening Mike, got my Polycam remote & second camera today and its all working well. One camera is lazy on the tilt up/down, but works.
19:46:07Z G0MJW Mike That's good Gareth
19:46:58Z G0MJW Mike Perhaps it isn't well balanced?
19:47:06Z G0MJW Mike The camera that is
19:47:52Z G0MJW Mike I think ON5AFB is planning a patch quad feed - but will it take the power?
19:49:07Z G4FKK Martin Evening all - pretty wet and wild here too Mike :(
19:49:22Z Gareth_G4XAT Suspect its the power transfer wiper where the fault is.
19:49:44Z G6MNJ_Paul Wet down here in Cornwall too not to mention windy but dish is well superglued down!
19:49:51Z G0MJW Mike What you do at home is your own business Martin ;)
19:50:07Z G4FKK Martin I like to share Mike :)
19:50:37Z G0MJW Mike Power transfer wiper? There isn't one is there?
19:50:44Z G4FKK Martin Evening Paul - fairly Cornish here today!
19:50:56Z ON5AFB Hi all, happy new year. Yes, patches take the power, i use one of it now. 73.
19:51:02Z G6MNJ_Paul Evening Martin
19:51:22Z G0MJW Mike @AFB Surprised they handle 50W. Useful to know
19:51:26Z Gareth_G4XAT Into the side bearing, its like a relay contact/distributor rotor arm...
19:52:09Z G0MJW Mike @AFB Is that with FR4 or something more exotic?
19:54:30Z Gareth_G4XAT Works OK on a flat surface :-)
19:55:07Z G0MJW Mike Tat's what they are supposed to be mounted on
19:55:28Z ON5AFB This one you saw is FR4 but we build severall different thikness and the results are equals.
19:55:43Z Gareth_G4XAT Yes, I was 'hoping' for a servo mech perhaps, with gears...
19:55:55Z G0MJW Mike It is a servo but no gears
19:55:56Z ON5AFB This is my first printed patches.
19:56:19Z G0MJW Mike 4 of them should work better for longer F/D dishes
19:56:50Z G0MJW Mike I looked at that but it seemed too much work.
19:57:02Z G0MJW Mike Tat looks like an early 80s 8 inch floppy disk
19:57:18Z Dave G8GKQ ON5AFB - any chance that you could leave 10499.25 clear for the BATC Net at 2000 UTC?
19:57:26Z G0DQH-James Mike G0MJW could you get in touch please
19:57:55Z G0MJW Mike Or even better perhaps AFB could join the bet and tell us about the patches - at 333ks
19:58:02Z G0MJW Mike Net, not bet
19:58:03Z ON5AFB Yes, i clear the QRG.
19:58:07Z GI4DOH_Richard Evening all
19:58:23Z Dave G8GKQ Thanks very much - you're welcome to join us at 333 ks
19:58:33Z Jim G7NTG Good evening - Just watching tonight
19:58:44Z G6MNJ_Paul Count me in
19:58:55Z G0MJW Mike I also
19:58:58Z G3IUZ Roger me too please
19:59:06Z G0MJW Mike More power please Dave
19:59:11Z G0DQH-James And me
19:59:16Z Keith GU6EFB And me please
19:59:18Z Gareth_G4XAT And me..
19:59:18Z G4FKK Martin Et moi :)
19:59:20Z GI4DOH_Richard And me
19:59:56Z G0MJW Mike @Jim - someone was asking on the DL forum about amplifiers like the ones you just modified. I pointed them at FB
20:00:17Z G6GZH David evening all, just watching
20:00:28Z Jim G7NTG email me on thebigclunk@virginmedia.com
20:00:46Z Jim G7NTG ah got a signal now
20:00:47Z G0MJW Mike D0 Dave. I will struggle tonight
20:01:09Z G4KLB Colin KLB here
20:01:15Z G0MJW Mike Suddenly much better
20:01:59Z G0MJW Mike No copy. Must be the intense wetness
20:02:16Z G0MJW Mike Plus two wide signals
20:02:16Z Jim G7NTG that's better Dave
20:04:08Z G0MJW Mike I have lost sound
20:04:17Z Dave G8GKQ And me
20:04:23Z Jim G7NTG Ireland has shrunk!
20:04:31Z Jim G7NTG no sound
20:04:47Z G4KLB Colin low vol
20:05:22Z Dave G8GKQ Order is: G6MNJ, GU6EFB, GI4DOH, G0MJW, G4XAT, G4FKK, G4KLB
20:05:31Z G0MJW Mike G0MJW ?
20:05:36Z G0MJW Mike Ah.
20:05:49Z G3IUZ Roger and me?
20:06:41Z Dave G8GKQ Order is: G6MNJ, GU6EFB, GI4DOH, G0MJW, G4XAT, G4FKK, G4KLB, G3IUZ, G8GKQ
20:06:52Z Dave G8GKQ Sorry Roger!
20:07:05Z G0DQH-James You forgot me
20:07:20Z Dave G8GKQ G7NTG transmitting tonight?
20:07:25Z Dave G8GKQ OK James
20:08:27Z Dave G8GKQ rder is: G6MNJ, GU6EFB, GI4DOH, G0MJW, G4XAT, G4FKK, G4KLB, G3IUZ, G0DQH, G8GKQ
20:08:31Z G6MNJ_Paul I have just ordered one of those !!! Due tomorrow
20:09:37Z Dave G8GKQ All OK Mike
20:09:42Z G4KLB Colin OK here Mike
20:12:35Z G0MJW Mike Thanks - yes it eventually locked on my own RX.
20:12:49Z G0MJW Mike Two!
20:14:06Z G0DQH-James Mike G0MJW could you get in touch please
20:14:30Z G0DQH-James james.colwill@hotmail.co.uk
20:15:44Z G0MJW Mike !
20:16:05Z Jim G7NTG picture quality a bit blocky Martin
20:16:15Z G6GZH David H.264
20:16:35Z Jim G7NTG its normally great!
20:16:41Z G0MJW Mike Yes, H264
20:16:49Z G0MJW Mike I am blocky because of the low data rate
20:16:58Z Gareth_G4XAT We deserve points for the RF we burnt!!
20:17:57Z G0MJW Mike 6 points so far.
20:18:15Z Gareth_G4XAT Zilch on 70cms, but we tried....
20:18:28Z G0MJW Mike I tried with Martin but no copy.
20:21:22Z Gareth_G4XAT Mike, my First Portsdown 4 has clip-on ferrites on ALL the USB leads, 3 of which are inside the box. The last one is an extension socket and that too has a ferrite on it. Its not given me any noise issues.
20:23:18Z G0MJW Mike Interesting Gareth
20:23:42Z Dave 80m alert
20:24:13Z G0MJW Mike You may have seen mine has an off switch which solves the issue when it's not in use
20:33:30Z G4KLB Colin I have one of those on my pre amp
20:33:46Z Jim G7NTG watch out for frost on that water cooler (although I bet you thought of that and run it on ethylene glycol)
20:34:37Z G0MJW Mike Lovely - why not water cool the driver amplifier as well?
20:35:25Z G0MJW Mike Ah. I see. Very cool :)
20:35:28Z g4fre what was the farnell part number of the vent?
20:37:17Z G3IUZ Roger Farnell Venting Element (Hylec) Order Code 2308395
20:38:33Z Gareth_G4XAT Cameras are all over eBay for £10-£20 ...leads less so...
20:39:08Z g4fre thanks roger, it is ideal for another ongoing project
20:39:24Z G0MJW Mike https://www.radioworld.co.uk/second_hand_nc-11c_ft-290_mk1_charger
20:42:54Z Gareth_G4XAT OO, that's going to be HANDY :-)
20:42:55Z G0MJW Mike Be really useful for a headless
20:42:58Z G0MJW Mike portsdown
20:43:32Z EI8DJ_Don Great idea Dave
20:44:19Z G0MJW Mike Can the PI work with HDMI capture dongles?
20:44:42Z G4KLB Colin Perfect solution for getting rid of the screen noise....... don't have one :-)
20:45:04Z G0MJW Mike Also hels when they go out of stock...
20:45:19Z Charles-G4GUO Gosh Dave you really are a masochist
20:46:05Z Dave G8GKQ Mike - I have seen some HDMI capture dongkles "work" but they don't look great
20:46:33Z G0MJW Mike I was wondering how you were going to do the HDMI repeater.
20:46:59Z Dave G8GKQ Initial plan is the H265 encoder box into a Pluto
20:47:01Z G0MJW Mike Those £5-£8 ones we got a year or so ago work very well with a PC to capture the Polycom
20:47:20Z Dave G8GKQ Or an LKV373A
20:47:22Z Gareth_G4XAT I've used a transistor across button pads - saves a relay...
20:47:52Z G0MJW Mike Problem is these things seem to dissapear from the market just after you get them working
20:48:00Z Dave G8GKQ Yes!
20:48:03Z Justin_G8YTZ I have some HDMI challenges too, both these projects sound great. All I want to do now is split the HDMI, one for the Tx and one for the Streamer
20:48:43Z Justin_G8YTZ challenge is when the Ryde reboots, it messes everthing up. aLL TO DO WITH edid OR LACK OF IT i FEEL.
20:48:56Z G0MJW Mike Paul - I have the same problem with GB3UD
20:49:36Z PA3FBX-Benno I have DMR 1,2 Mhz higher on the same site.
20:49:52Z Dave G8GKQ Justin - have you tried hard coding the RPi HDMI settings on the Ryde?
20:49:53Z G8GTZ I never had a problem with GB3HV 70cms Ryde :-)
20:50:02Z PA3FBX-Benno Working with 6 pot filter
20:50:09Z Gareth_G4XAT Can you recommend the amazon seller for the 4" VNA please
20:50:25Z G0MJW Mike I think the problem with GB3UD is the 4 MHz bandwidth. Multipath is an issue
20:50:35Z Dave G8GKQ GU6EFB
20:51:11Z Justin_G8YTZ @Dave, yes I have, 1080 50Hz and 720 50Hz
20:51:13Z G4KLB Colin I used a program called "Input Director" but all my systems are windows
20:51:34Z G0MJW Mike This new volume control feature on the Ryde is very timely
20:52:06Z G0DQH-James Temp on my PA 14.7 deg C
20:52:20Z G6MNJ_Paul Thanks Colin
20:52:55Z Gareth_G4XAT DXRobot from MouserUK worked for me
20:53:22Z G0MJW Mike Same here. Is it me or is it foggy in Gurnsey at the moment
20:53:31Z Dave G8GKQ DFRobot DFR0550 from Mouser
20:54:05Z G0MJW Mike Someone got one for Christmas
20:55:43Z dg0opk TNKA YOU VERY MUCH to all... BEST WISHES TO 2022 STAY SAVE and HEALTHY
20:57:03Z G6GZH David for cross platform mouse/kb sharing - https://github.com/debauchee/barrier
20:57:25Z G4KLB Colin I am using a Waveshare 5inch DSI LCD from The PiHut
20:57:35Z G4KLB Colin Thanks David
20:57:46Z G0MJW Mike Tinde is the official site
20:58:11Z Keith GU6EFB No Fogg here at the moment
20:58:31Z Keith GU6EFB Thanks Colin
21:01:11Z G4KLB Colin The best 5 inch screen would whatever G8GKQ has :-)
21:02:56Z G4KLB Colin Would be
21:04:17Z G6MNJ_Paul G0MJW I have tried 333 1000 and 2000 !!
21:05:06Z G6MNJ_Paul WE suspect antenna its a halo
21:05:24Z G7JTT-John GE all not long in so won't be on but watching on the big TV as the XYL has gone to bed 😁 anyway happy New Year to all
21:05:36Z Dave G8GKQ remaining order: G4XAT, G4FKK, G4KLB, G3IUZ, G8GKQ
21:06:00Z Dave G8GKQ Hi John - Hope you had a good Christmas with at least a day off!
21:06:41Z G0MJW Mike Test card Gareth
21:07:13Z M0SII I think UD has a non standard symbol rate, not 4Ms.
21:07:32Z Dave G8GKQ 4126?
21:07:33Z G7JTT-John Hi Dave yes got Christmas day off thanks and I think I'm personally responsible for the shortage of test kits, I've delivered them all over the Christmas weekend hi
21:07:38Z G0MJW Mike Yes, 4167, but that's not the problem. I can get it, but only briefly at a time
21:07:39Z G8GTZ That's right - something like 4.182...
21:08:05Z G8GTZ you need to talk to Albert
21:08:51Z G0MJW Mike PC App is certainly the best way with NanoVNA. However field work it helps to have a larger screen
21:09:11Z M0SII Yes, I can get in using analogue!
21:09:17Z PA3FBX-Benno What PC app Mike??
21:09:23Z PA3FBX-Benno where to get that
21:09:31Z G0MJW Mike NanoVNA saver or something like that
21:09:41Z G0MJW Mike Google Benno
21:09:59Z Gareth_G4XAT Much better here...
21:10:06Z Jim G7NTG big improvement Martin
21:10:21Z G0MJW Mike There is a facebook group and a groups.io group where they discuss these things.
21:11:09Z G0MJW Mike https://nanovna.com/?page_id=90
21:12:10Z G4KLB Colin Its the taking part that counts
21:12:37Z G0MJW Mike You can cover multiple sins with a 3D printed Bezel
21:14:03Z G6GZH David I've been VoIP for > 10 yrs here
21:14:29Z G6MNJ_Paul Likewise VOIP here for many many years - its really good
21:14:39Z G4KLB Colin Easy to set up ... and free
21:14:44Z G0MJW Mike Problem is when you live in remote places like Harwell, the power goes off frequently and VoIP won't work when it does
21:15:22Z G0MJW Mike Only 1/3rd of the world watching so she's OK
21:15:34Z G6GZH David 20 minutes UPS then generator Mike, though the FTTC probably dies after a few hours
21:16:09Z G0MJW Mike With no -48v on the line how am I going to recharge my car battery?
21:17:29Z G4FKK Martin Thanks Jim :)
21:22:19Z Dave G8GKQ G3IUZ?
21:22:22Z G3IUZ Roger oops no go
21:22:32Z Dave G8GKQ OK
21:23:34Z Gareth_G4XAT What about a BIG WHEEL antenna in place of a halo?
21:24:12Z G0MJW Mike Stacked Halos are a good solution
21:24:48Z G0MJW Mike 7? Next week then!
21:24:48Z Gareth_G4XAT Big wheel has gain....and stack :-)
21:25:53Z Dave G8GKQ All good Roger
21:27:22Z G4FKK Martin Ah! A hidden tobacco tin :)
21:28:29Z G0MJW Mike How do you cool the water Roger?
21:28:37Z Dave G8GKQ Goodnight All
21:28:40Z Jim G7NTG 73 all Goodnight and Happy new year to you all!
21:28:44Z G8HKN-Roger H N Y
21:28:53Z G0MJW Mike 73 All Happy New Year
21:29:10Z G4FKK Martin Night all - good net this evening. HNY...
21:29:11Z dg0opk 73 to all ... HNY 2022
21:29:14Z G6GZH David GN all, 73 and HNY
21:29:33Z Gareth_G4XAT 73 all, more 'test card forgottens' in 2022....
21:29:53Z GI4DOH_Richard GN all + HNY
21:29:58Z G3IUZ Roger The outlet water at present is just being dumped into that little tank. OK for winer I guess but i'm going to try and get a small ex car radiator with greater surface are.
21:30:43Z Keith GU6EFB Ok Dave I will have to sort out the studio lighting next for next week
21:31:00Z Gareth_G4XAT Car heater rad would probably do...with a FAN ;-)
21:31:25Z Justin_G8YTZ night all!
21:31:26Z EI8DJ_Don GN all, have a better NY
21:31:36Z Justin_G8YTZ Night Don
21:31:56Z Dave G8GKQ https://batc.org.uk/contests/xmas-ladder/
21:31:57Z EI8DJ_Don Thanks Justin
21:32:21Z Dave G8GKQ Activity Ladder: https://batc.org.uk/contests/xmas-ladder/
21:32:36Z G4FKK Martin HNY Don - thanks for the email a few days ago :)
21:32:39Z Justin_G8YTZ Struggling with my HDMI spltting, cannot make two monitors work at once
21:33:39Z M0DTS 73 all, sorry was called away just before the net, i'll be here next week hopefully.
21:34:03Z G4FKK Martin Yes, we missed you Rob - HNY to you and yours
21:34:15Z EI8DJ_Don no problem Martin have a good one
21:35:09Z M0DTS I may come up on the sat sometime tomorrow, best wishes for the New Year to all.
21:35:22Z G4FKK Martin I'll look out for you :)
21:35:57Z Gareth_G4XAT Yes Rob, tell/show us about your red beacon...
22:16:35Z G0MJW Mike Roger - you can buy radiators for PC water cooling quite cheaply